Home

All Products

Tayfun from Turkey

solar pump inverter is really in very good quality and we also prepared some promotional products for exhibition. We are going to make new orders soon. Last year there was only one local agent and this year, there are more than 8. Some of them only sell Veikong!
Cristian from Chile

It’s very good! LCD options make it much easier to use. That’s the strong point, easy of use. And robust. Great PC software.
Brahim assad from Syria

VFD500 output frequency is stable when the others are fluctuating. Also output current is less than others, that’s why output frequency is higher too which can save more energy.

Contact Person : Terry

Phone Number : 008613910001000

WhatsApp : +8613923735888

220v 2.2kw 4kw 50hz 60hz Off Grid Solar Pump Inverter IP20 IP65 Protection

Place of Origin	China
Brand Name	VEIKONG
Certification	CE
Model Number	VFD500-PV
Minimum Order Quantity	1
Price	Negotiable
Packaging Details	the power less than 45kw use Carton, starting from 45kw use Wooden case
Delivery Time	3 days, depend on the order quantity
Payment Terms	L/C, T/T, Western Union
Supply Ability	15000pcs per Month

Product Details

Product Name	2.2kw Single Phase Inverter	Voltage	220v
Power	2.2kw/4kw	Protection Level	IP20/IP65
Keypad	LED And LCD	GPRS	2g GPRS, 2g/3g/4g GPRS
High Light	60hz Off Grid Solar Pump Inverter , Off Grid Solar Pump Inverter IP20 , 4kw solar inverter IP65

Product Description

Single phase pump solar pump inverter 220v 2.2kw 4kw 50hz 60hz

Model Range

Key Advantages:

1, Maximizing power generation efficiency of solar modules with the use of advanced MPPT control technology.

2,, Adjust water outflow of pumps quickly on basis of sunlight intensity change.

3, Built-in C3 EMC filter and DSP technology and Infineon PIM design,with functions of light weak protection,

dry run and low voltage,full water warning, overvoltage and overtemperature protection.

4, Advanced calculation for Pump flow and LCD monitoring display.

5, Automatic running without any commisioning in keypad control and GPRS monitoring option(as option).

6, Dual supply capability with change over switch - solar and grid compatible.

Techincal Parameters:

1. Wake up and sleep function parameters:

P47.05	Light detection threshold	If the output frequency is lower than this value and exceeds P47.06, it will be reported to Sleep and stop	0Hz
P47.06	Light detection time	See P47.05 for explanation.	60s
P47.07	Light weak wake up time	After the sleep fault is reported, if the time when Vdc is higher than the undervoltage point is greater than the set value, the fault state is exited and the operation continues.	600s

2. Dry runing protection function parameters:

P24.12	Dry run/Unload protection option	0: No offload detection is performed; 1: Enable dry run detection	1
P24.13	Dry run/Unload detection level	0.0 to 200.0% The percentage of motor rated current.	0.0%
P24.14	Dry run Unload detection time	0.000s～60.000s	30.000s
P24.15	Unload detection offset frequency	0.00Hz～Fmax Detection frequency=Fmax-P24.15	5.00Hz
P24.16	Reset time of dry run protection	0.0～6000.0	240.0s
P23.21	Dry run detection mode	0000:Coast stop 1000:Fast stop 3000:Continue to run	0000

3. Water full protection function parameters:

P47.18	Full water level detection channel	0:ineffective 1:AI1 2:AI2 3:AI3 4:AI4 Note: DI terminal function code 60-full water level detection is same with Analogue detection, and the detection time and recovery time are the same.	0
P47.19	Full water level detection value	0.0～100.0%	0.0%
P47.20	Full water level detection time	0.0～3000.0s When DI-60 is valid or meets the analog detection channel greater than P47.19 and maintains P47.20 time, the system reports A.Full and stops.	10.0s
P47.21	Full water recovery time	0.0～3000.0s When the condition described in P47.20 does not meet full water level detection requirement ,it will be returned to normal state after delay	10.0s

Conditions for full water detection to take effect:

1. Any DI terminal set to No. 60 function receives the input switch closing signal.

For example, after P06.03 is set to 60, DI3 closes.

2. The analog input is greater than the detection value,

for example: set P47.18 = 1, P47.19 = 50%, then the AI1 input is greater than 5V or 10mA

3. After the condition 1 or 2 is met, continue to set the time at P47.20

And the system will report A.FULL Full water recovery conditions

4. The system enters the full water detection stage and displays A.FULL

5. When both conditions 1 and 2 are not met and the maintenance time is greater than the time set in P47.21, the system resumes.

Product application pictures

60hz Off Grid Solar Pump Inverter

Off Grid Solar Pump Inverter IP20